Demo Lab: Configure a Meraki Network

I’ve wanted to get some more Meraki kit into the office to experiment with for ages and finally got round to sourcing some and setup a test lab. If you’ve never used Meraki equipment before you should! opening up a box is like the first time you purchased an iPhone or a brand new car it feels a bit special! No I’m not weird I’m a nerdy¬†IT guy ūüėČ

This is high end networking equipment for enterprise and utilises a powerful cloud management platform. Setup is unbelievably easy, a firewall, switch or access point can be preconfigured in the cloud and as soon as equipment hits the internet it downloads its configuration and jumps into life. This is an Incredibly powerful feature making it super easy for global businesses to manage multiple locations with even the smallest IT team.

In my test lab I have a modest selection of devices to walk you through a basic setup, you wont believe how quick and easy it is.

  • MX80 Firewall
  • MS24 POE Switch
  • MR18 Wireless Access Point
  • MR34 Wireless Access Point

Cisco Meraki Lab 18

What makes Meraki so great is that everything is managed from their online cloud portal.

Create a new network

Here I’ve logged into my account and created a new network specifying a combined hardware network type (Basically means the network can include switches, firewalls and wireless AP’s together) and selecting the available hardware from the inventory. new devices can be added by specifying the serial number of the Meraki device or simply by adding your Meraki order number which is great when ordering more than ten devices at once.

Meraki Lab 5

Now we have a new network and you will notice there are menus down the left hand side

  • Network¬†Wide
  • Security Appliance
  • Switch
  • Wireless
  • Organization

Configure Firewall

We can now start to setup each device by going into the specific menu so lets start by going into the Security Appliance menu to configure the firewall and LAN configuration.

Meraki Lab 7

In our lab lets use a typical NAT configuration and track clients by MAC address.

Meraki Lab 8

Specify a subnet of / 24 and set the firewalls LAN IP to

Meraki Lab 9

Next setup DHCP.

Meraki Lab 10

I will leave the firewall rules as defaults for now but that’s it for the firewall. NAT configuration with DHCP on LAN and no port forwarding. Obviously you can configure a whole host of security filters but for now lets get the basics setup.

Meraki Lab 11

Configure Switch

Now we need to configure the switch by going into the Switch menu. No VLAN’s needed in our lab but you can configure VLANS and QOS¬†and turn POE on or off as required.

Meraki Lab 12

Meraki Lab 13

Configure Wireless

Ok that’s the switch done lets go into the Wireless menu and configure an SSID.

Meraki Lab 14

Here we simply enable and rename SSID 1 to ‘Southern IT Networks’

Meraki Lab 17

Click on Edit to configure the encryption, lets go for WPA2 and set the key. If we need to we can configure a splash screen which is great when configuring a network for a hotel or café because you can add some branding and add special offers for users of guest wireless.

Did you know if a UK business offers guest wifi they are breaking the law unless they comply with numerous regulations? Meraki offers a great feature called SMS authentication where users have to receive an authentication code to their mobile before being able to log in.

Meraki Lab 18

Meraki Lab 19

That’s it with the basics, we’ve now configured the firewall, switch and Access point. All we do now is connect the hardware to the network, wait a few minutes for the firmware to auto update and bingo! our network auto configures and we don’t have to mess about logging into each device individually, everything’s been done from the portal.


Now the hardware is online we can view the status of each unit by viewing the overview pages. Here we can see what ports are in use on the firewall and how much traffic is passing through it.

Meraki Lab 22

We can do the same with the switch.

Meraki Lab 24

The most interesting part to look at is the wireless. From here we can see all connected clients, what AP they are connected to and even see their general location on a floor plan using the magic of triangulation!

Meraki Lab 25

Meraki Lab 26

Meraki Lab 28

There you have it, a very quick look at how to configure a Cisco Meraki network.


We configured a firewall, switch and wireless access point before we even connected any hardware. Once the hardware was connected it downloaded the configuration and set themselves up automatically.

Enjoy great features such as automatic firmware updates, Wireless client location, and Wireless slash pages and SMS authentication. Over the coming months I’ll deep dive into some of these features so subscribe to the blog!

Author: Ian@SlashAdmin

Share This Post On
468 ad

1 Comment

  1. Thank you for this explanation.

    Post a Reply

Leave a Reply to PAtate2014 Cancel reply

Your email address will not be published.